419-681-1915
WHAT IS A CERAMIC COATING & SHOULD IT BE ON YOUR VEHICLE?
WHY ARE CERAMIC COATINGS BETTER THAN WAXES OR SEALANTS?
The chemical makeup of Ceramic Coatings does three very important things differently than that of a wax or sealant. Firstly, it is capable of bonding to the surface underneath for a matter of years where we see a few months out of most waxes or sealants. Secondly, the chemical makeup of the Ceramic Coating is able to withstand penetration of UV and harmful environmental contaminants to keep your paints finish from degrading over time due to exposure. Thirdly, the Coating produces a highly repellent surface, where dirt and contaminant is rejected instead of absorbed in to the surface. This keeps the surfaces cleaner longer and makes regular wash maintenance very easy and safe.
THE ULTIMATE CERAMIC COATING PACKAGE
9 Year Guarantee | Extreme Gloss | Effective Self-cleaning and Water beading | Extreme Chemical Resistance
LEVEL ONE POLISH
- With a Level 1 Polish, the vehicle will first go through a Wash, Decontamination, and Clay bar detail.
- Vehicle is prepped for Polishing.
- The paint is polished using the best combination of pads and products for your clear coat type to get the most correction while leaving a very glossy finish.
- After the polishing is complete, the vehicle is cleaned to remove the oils from the polish.
- Lastly the vehicle gets one layer of Gtechniq Crystal Serum Ultra & topped with TWO coats of Gtechniq EXO to protect your paint.
Durability: 9 Years
Crystal Serum Ultra is the best paint protection you can get, it keeps your car looking glossy and new, prolonging the life of your paintworks perfect finish.
Key to Crystal Serum Ultra’s performance gain is the introduction of a revolutionary new 7nm nanoparticle alongside an existing 20nm nanoparticle and increasing the ratio of crosslinkers which reinforce and thicken the top layer of the coating.
The hard 10h top and softer 7h base layer offer improved swirl resistance over regular 9h paint protection coatings. Compared to standard ceramic paint coatings, Crystal Serum Ultra forms a relatively thick combined film which greatly reduces surface hazing.
The molecular structure of the hard top layer is exceptionally chemical resistant. Crystal Serum Ultra can withstand even the strongest wash chemicals and bird droppings.
An additional benefit from having a flexible base layer and hard top layer is that Crystal Serum Ultra is very resistant to extreme heat changes.
In this package we also protect the Wheel Faces with GTECHNIQ C5
C5 Wheel Armor offers the best protection for wheels, repelling brake dust, as well as road contaminants such as salt and mag chloride, making them easier to maintain.
We also Coat the Windshield in GTECHNIQ G1
G1 ClearVision Smart Glass primary task is to increase your safety as well as your passengers' while driving in difficult road conditions. We assume that the worse the road conditions are the more the driver should be focused on driving. It provides a much better view of the road by keeping the windows clean, repelling water and dirt and through that increasing windshield transparency. It repels both water and dirt from the glass surface. In rainy or night conditions, it offers invaluable assistance, as the driver will notice any obstacles or dangers much sooner.
NOTE:
This package includes a Single Stage Paint Correction that will correct any light to medium paint defects to prepare the surface for coating. If severe paint defects are present a multi stage correction will need to be added to the package.
ARE CERAMIC COATINGS SCRATCH PROOF?
Unfortunately there is a bit of irresponsible marketing in the Coating world. Coatings are not thick enough nor hard enough to withstand scratches from say a dirty wash mitt, a key, or a rock chip. They do produce a slightly harder surface than the paint itself, but not enough to withstand this type of damage. The 9h Hardness measure that is used describes the Coating’s “vertical hardness”, or its ability to withstand penetration from UV and chemical damage and keep it from reaching the paints finish. That is what we are asking Coatings to do. We coat cars so that they still look good years down the road, and do not suffer from the slow roll of UV and environmental contamination that degrades the finish. Where a Coating can play into scratch resistance is by producing and extremely repellent and slick surface, so that the surface lets go of loose dirt that you would otherwise move across the paint when washing and minimize the friction between the dirt, your wash mitt, and the paint.
GTECHNIQ CLEAR VISION SMART GLASS
G1 ClearVision Smart Glass primary task is to increase your safety as well as your passengers' while driving in difficult road conditions. We assume that the worse the road conditions are the more the driver should be focused on driving. This product provides a much better view of the road by keeping the windows clean, repelling water and dirt and through that increasing windshield transparency. It repels both water and dirt from the glass surface. In rainy or night conditions, it offers invaluable assistance, as the driver will notice any obstacles or dangers much sooner.
Durability up to 2 years depending on conditions.
GTECHNIQ PERMANENT TRIM RESTORER
C4 Trim Restorer- Unlike many trim products on the market C4 is an exceptionally thin (circa 30nm) optically clear film which means that it does not add an unattractive gloss film to the surface, instead it restores all but the most faded trim to an as new condition. You can expect up to 1-2 years durability from a single application.
GTECHNIQ WHEEL ARMOR
C5 Wheel Armor offers the best protection for wheels, repelling brake dust, contaminants and making them easier to maintain. Because of C5’s unique, exceptionally fine surface rheology and chemical bonding mechanism, its performance is outstanding. The former property gives the coating its excellent stain and contaminant resistance, and the chemical bond formed between the wheel surface and C5 makes the coating durable. C5 will retain its integrity up to temperatures of 1,112 F making it suitable for all parts of your vehicle's rims and brake calipers.
Durability up to 2 years depending on maintenance.